Separate names with a comma.
I'm getting out of the business before it costs me any more money... I have an M10 with every bell and whistle: MoVI M10 - ready to fly Full...
Includes 2 programming cables, landing gear, landing gear extenders, CS8 mounting plate, camera mounting plate, camera mounting plate screw, 3...
Sorry if this has been asked elsewhere, but I didn't find an answer. I'm about to buy a MoVI and want to use the Toad in the Hole to make it...
I see that the firmware has been updated to be compatible with the Graupner receivers using SBUS. Will this work the same way that the Radians...
I "lost" the JST fan out cable for my FF Motor Control Set. I called QC and they can't source just that part and they don't know where to source...
My mx-20 mysteriously turned itself into a paper weight. When I power it on, I get a red led and a blank screen. I've tried: removing the...
I'm using an MX-20 transmitter with a GR-24 on the CS8 and a GR-16 on the gimbal. I'm trying to map transmit channel 9 to receiver channel 5 on...
I'm starting to play with gain settings but I'll confess, I'm still confused on where to start and what to watch for. The manual says to start...
I'm unable to charge my 3S 1200mah LiPo packs because of this error. Here are the steps I'm following: Power on the power siupply/charger Plug...
Does any one know how long after power up the Wookong M will determine the "home" position for failsafe?
I have the gentled shutter cable connected to the aux port on the tilt Radian, however, when I flip the switch I have programmed for the aux port...
Aircraft Type: Cinestar 8 with HL mods Gimbal Type: 3 Axis Radian Type ( 1, 2 , 3 axis) 3 Axuis Gimbal Power source: 1200mah 3S Lipo Gimbal Radio...