/dist/images/branding/favicon
Separate names with a comma.
I believe one current work around is to switch the mode control from AIRBORNE to HANDHELD in the GUI once off the ground. Greetings, Adam
We submitted the RMA request at 8:18am and received a pre-paid shipping label for the return at 10:55am today. Greetings, Adam
Word is that it will theoretically accomodate up to thirty-two (32) 6S/4.5A lipos. However, it has only been tested with 8. Greetings, Adam
One blink for start, two blinks for stop rec...?;) Greetings, Adam
Hello Keith, We are working on your request and will have the parts for the update on Monday. Greetings, Adam
The Controller uses 2.4Ghz XbeePro Tx/Rx, I don't think it would be acceptable. Greetings, Adam
Hey Larkin, Short of placing some boxes under the booms to get the gimbal off the ground for take off, changing the "gimbal application" in the...
Fabien--yes, that will be an attractive camera/downlink package indeed. I mostly fell back on the Synapse OSD for real-time flight data over the...
Hey Sebastian, Are you still in setting3=easy? When you calibrate the gyro does the kopter respond with "3 beeps"? A hasty compass cal....
We will be giving it a go this week, however I'm a bit reluctant in testing the new SD-card "flush" feature at power loss. Thanks for holding...
Anyone who isn't comfortable with the software update can send their ESC into Quadrocopter for a complementary firmware upgrade service. email:...
Austin, Looks like they will be arriving at our shop in the next 2-3 days. Greetings, Adam
Dave, Here is the Freefly motor controller set in question: https://www.quadrocopter.com/Freefly-Motor-Control-Set_p_926.html Greetings, Adam
Hello We have developed this small interface cable as a universal shutter and video start/stop via the MoVI Controller:...
All, There appears to be some script error with MKTool v2.08a along with an OSD incompatibility error. Both errors appear inconsistently upon...
2.08 has been running well. When you start the MK in boat mode it appears as "BOAT MODE" on the Graupner LCD. Greetings, Adam
Hello Kjetil, Have you changed the "Radio Type" to: SBUS ? There is info in the is manual--...
Dang! Skookum support work, Steve and Andy! Greetings, Adam
Hello Tuukka, Do you have adequate clamping pressure on the TITH quick release. I struggled with similar pan axis instability and found that...
Hello Colin, We have updated to 2.06f on multiple models. There hasn't been any reported issues with 2.06. Greetings, Adam