Separate names with a comma.
This is such a breeze, after a long shoot day to come back and run all your QCs back to storage charge. [IMG]
Some lipos will come back from the field with a high cell gap. Sometimes .030, one was .050 (QC8000s). As for my QC1200s, one of them is at a...
This keeps happening to me when I go out with clients... I'm using a Lawmate 1.2Ghz powered by a QC1200. The Lawmate is receiving a video feed...
Yes!
Day one Paracharging I'm taking a few precautions. I wanted to light up 6 QC1200s at 20 amps on a paraboard, but for starters, lets just go at 5...
Im afraid to charge them to 100%, given the storage charge being off by 15 or 20% Even the QC1200s I'm not sure if I should paracharge
Speaking of fires. Andy have you paracharged your 10,000s yet?
Remember Andy, paracharging & the percentage being off by 15-20% Think that might be the "output capacity"? EDIT: Confirmed the temp sensor does...
I just updated as well.
Errgg..
It's got a shine but it's flat compared to the chrome on the BL pads.
Hey Nick, Did your main leads look like mine before they melt? http://forum.freeflysystems.com/index.php?threads/cold-joint-pdb.1947/#post-24387
Unrelated, but my PDB is conformal coated.
[IMG] [IMG]
Riley at QC soldered my PDB, but looking at the main leads, does it look like a cold joint compared to the BLs? Thanks guys! [IMG]
The light & hairline crack is a great idea Andy
I'll try it with a fully charged lipo and heat gun the sensor on storage charge mode. Perhaps the percentage plays a variable in it (though it...
Andy, my results are the same. I used a heat gun, baked the sensor. No shut off. BUT: on charge mode it worked perfectly :) Workaround? --...
Side Note: I (finally...) got my HobbyKing shipment in. These battery savers are a joy compared to the Mikrokopter ones. They only take a...
Thanks Bill for this! Going to purchase these asap!