/dist/images/branding/favicon
Separate names with a comma.
Hi Steve, We have two options for powering the MoVI .. the first is using the TB50 batteries, with the battery adapter plates, and the second is...
Hey Noah, Easiest way to get a toad onto a 25mm boom is to make a clamp. If you can't find anything already made out there I can build one for...
Hi Noah, Yes we do make the top and bottom plates and a bunch of other parts Top Plates are here and Bottom Plates are here Cheers Chris
For sure, hear is our Alexa, with the power coming from the LBUS, it goes into the power breakout on the back of the top plate. The Power breakout...
Hi All, Here are a couple of photos of the production version of our MoVI Pro Bridge Plate. [ATTACH] [ATTACH] [ATTACH] With this we are now...
Hi Sebastian, Unfortunately we didn't establish enough interest to push ahead. I'd be happy to do a custom solution for you. We only need about 10...
Hi All, Just a heads up, if you are heading to NAB in Las Vegas, Tom from Ignite Digi will have all our MōVI Pro products there, including power...
Hi Rob, I won't be at NAB, however Tom will be heading over, love to hook up a meeting. Cheers Chris
Hi Rob, Here is our very first camera plate in use with Cooke S4's and focus and Iris motors in use. no LMB in this photo unfortunately.[ATTACH]...
Hi Guys, Thought I would share this with you, this is how we shoot with one camera using the MōVi Pro and handheld/tripod trying to be quick on...
Hi Tim, I'm happy to hear the power adapter is working for you, and thanks for the kind words on the build quality. You shouldn't have any...
Hi All, Just wanted to share a system that we have been using for a while now. Back when we were using the M15 we developed a bridge plate that...
Hi All, Just a quick update, all pre-orders have shipped out in time, and the first batch has sold out. I am making the second batch right now,...
The cable runing to the tilt motor and camera tray is a single cable, to remove it you need to undo the tiny bolts on the bottom of the camera...
Also worth checking all the mounting points and hardware for your follow focus system are tight, a loose fitting somewhere will vibrate and ruin...
Some more high speed shooting with a very ugly lens on the front ;) https://www.instagram.com/p/BREUNWXAfow/ 100km/hr with no issue ;)
Hi Ulrich, What does the balance display on the MoVI Pro screen say, are all the lines in the centre for tilt, roll and pan?
Hi All, Here is a little power breakout that I have built that works with our MoVI top plates. [ATTACH] The power breakout has four 0B.302 Lemo...
If the camera is too high in the cage, then the tilt balance and roll balance is going to be statically unstable (wanting to roll away from the...
Hey Chris, U7 490Kv with 80A ESC and 6S will work fine, depends on the rest of the electronics in the power system though .... also might find...