/dist/images/branding/favicon
Separate names with a comma.
You can have a similar Error\Boot Failure if the cable has come loose underneath the Tilt Stage. That requires you to take the screws out of the...
[ATTACH] I think the Error page looks like this when you have the Roll beam upside down with the Movi XL:
First thing: Make sure the Roll Beam isn't upside down. There's a sign on it that says "This Side Down", and that should point toward the...
I would look for something that's telling the Movi to do that, maybe a trim setting or something plugged into the Movi? Is anything connected to...
I just pause the motors (or turn it off), invert it by swinging the pan tubes over the right side of the camera and then underneath, then mount it...
That new Mimic is incompatible with the older M15. It's meant to work with Movi Pro. On the older Movi's (M5/10/15), you need the Mimic Beta,...
Woohoo! Hi Bryan! Hope you're doing well.
I agree, the Movi project seems dormant. I work with the Movi XL pretty frequently, and it's a good remote head, and I even use My Movi Pro not...
Have you Bound the Mimic and Movi Pro together successfully? When it says LOS, that means Loss of Signal, and they're not bound. You have to...
Movi's will line up the way they point the camera with the Toad in the Hole latch. So make sure your latch is pointed straight back at you in the...
That's what I figured. It's almost 9am on the west coast, so hopefully they'll be in the office soon... I don't think it's hard or...
See if you can go to the app store and download the Movi Pro app. I see one in the app store, I just don't have a Movi in front of me to test with.
Actually, if you go to the app store, can you just download the Movi Pro app? Maybe it came out of Beta?
I sent them an email to ask for them to renew it. Hopefully will get back up quickly.
Yeah, mine's expired too. Did you already email support? They need to renew it.
The fuse resets itself if it gets overloaded. You need to try your accessories individually to see what’s causing the overload.
I actually have the same problem. Usually a reboot helps but I don’t use my Movi as much these days, so I never bothered to fix it. Let me know...
Are you using the correct version of the app? I believe there is more than one, and the one for the M10 is different from the more common Movi Pro.
You probably won't hurt it with the buzzing, but you could also put a hand on the cage to give it some weight. I never had wifi on my M15, so I...
The buzzing is usually a motor stiffness set too high. You have to go in the app to adjust the tuning. Man, it’s been a while since I’ve used an...