RedRock SLS Black for MoviPro issue

Discussion in 'MōVI Pro' started by Azzie Scott, Apr 24, 2019.

  1. Azzie Scott

    Azzie Scott Member

    Joined:
    Jun 29, 2017
    Messages:
    55
    Likes Received:
    1
    Is anyone using the RedRock SLS Black for Movi Pro with the bush pilot and mimic? I’m having a issue when the SLS motor shows a fault on mimic when it’s left idle at the .00 setting on the mimic. Which causes me to recalibrate frequently.this only happens when it’s left at that position, it doesn’t fault at any other position on mimic. Want to know if anyone is experiencing the same. I’m on the latest blackjack firmware for Movi Pro.
    I’ve reached to RedRock and they’re reply has been extremely slow or no reply at all.
     
  2. Eric Bergez

    Eric Bergez New Member

    Joined:
    Jul 17, 2018
    Messages:
    13
    Likes Received:
    4
    Alejandro Selman likes this.
  3. Blake Scott

    Blake Scott New Member

    Joined:
    Jul 30, 2018
    Messages:
    7
    Likes Received:
    2
    I have been having this same issue. You constantly have to recalibrate only to loose zoom control (primarily for me) within minutes. I have reached out to Redrock and they sent me a new motor. I now have another one in addition to that one and both have the same issue even while selected on Hocus Reflex. I also can select motor speed and settings back and forth and it results in no change to the motors. Clearly a firmware issue I hope gets addressed soon.
     
    Alejandro Selman likes this.

Share This Page