MoVI M5 Noises and Grinds when Turned (HELP)

Discussion in 'MōVI Pro' started by Haven Shank, Aug 21, 2017.

  1. Haven Shank

    Haven Shank New Member

    Joined:
    Apr 6, 2016
    Messages:
    5
    Likes Received:
    0
    Hi Guys,
    So I fired up my MoVI M5 after having not used it for several months. When I turn it on, it kind of jerks and does a high pitched frequency hum. The hum gets louder if I touch any part of the main section where there power button is clear up to where it attaches to the handle. It also sounds like it's grinding when I turn it completely to the right when powered on. If I power it off, there is no grinding at all -- it's completely smooth. It hasn't been dropped or hit whatsoever so there's no damage to it. I've reset to factory settings and then set to AutoTune and it still does it.

    Ideas and advice appreciated! Thanks!
     
  2. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,369
    Likes Received:
    1,162
    See my response to your duplicate posting, Haven.

    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     

Share This Page