Separate names with a comma.
Where are you located?
Thats correct. Unit just sold. Sorry. :(
Perfect condition. No bumps, bruises, scratches, or hard landings. Very low hours flown. Maybe 3 flights at the most. :) Futaba 14SG and...
You have to adjust all flight controllers to fly properly under different conditions including weight and wind. :confused: To tell you the...
It could do it and be well under max AUW.
I have done it. Have the video to prove it. We had a location shoot for King Kong and the weather was GOING OFF.
I would definitely work with freefly on that high altitude flying thing. As a pilot of prop airplanes we tend to loose thrust due to engine power...
Have u looked on YouTube? Lots of tutorials on the way to set up telemetry.
We have flown the ALTA in high winds here in Hawaii and had no issues. The ALTA Manual has a Density Altitude Chart that shows the max gross....
Perfect condition. No bumps, bruises, scratches, or hard landings. Very low hours flown. Maybe 10 flights at the most. :) Futaba 14SG and...
I would not use the Wi-Fi while in flight. It can cause interference with the 2.4 GHz band used for radio control. We use the Connex unit which...
:mad: How in the hell is a Graupner air module going to crash an ALTA? Its a standard shunt and its only on one of the 2 batteries. Is Freefly...
In any case..... The ALTA is an amazing machine that we will continue to use. Cameras are getting lighter and we will be ready!:)
Seems that most of the directors I have worked with tell us to launch and we wait.......and WAIT........ and WAIT..........:mad:
Spread spectrum technology allows each to adjust to other radios in the area. The switch frequencies hundreds of times per second to adjust to...
It has been a tough haul with the FAA rules. :oops: Here is the down low based on our experiences. Got our FAA 333 exemption. Not too hard but...
Copy and repost in the Movi section and name me....... Your probably right.:)
The copter is flying pretty stable in all modes and there are no noticeable oscillations. The issue we are having seems to be in settings on the...