my m5 stabilizes only a few minutes, the lights are still on but the engines stop working, I turn it on again and it continues to work for other minutes, what can I do?
Sebastian: Can you give more details, please, along with some images of your setup? You say "the lights are still on" - do you mean you have three green LED? Thanks Andy Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. The Ground Is The Limit™ ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
We are having the same problem (and have for years. We're getting less than 5 minutes of use out of the MoVI before the motors disengage. I've got it sitting on the stand right now and it has already died. Battery indicator shows 2 LEDs and the batteries are less than 3 weeks old. I tried updating firmware and it is up to date. The load is a Blackmagic Micro Cinema Camera with a Metabones Speedbooster and a Rokinon 24mm. Camera package weighs in at 3lbs 13 oz.
Ross: Sounds like there is a more serious issue going on here....have you opened up a ticket by sending an email to Freefly Support (support@freeflysystems.com)? Andy Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. The Ground Is The Limit™ ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
check or the cables are reseated properly. Undo the 4 screws on top on and check that a cable has not wiggled free, one of mine was loose when i set-up it first time!! My next step would to find a good known working battery and see if its just the battery