Changing com ports for Bush Pilot

Discussion in 'MIMIC' started by Rick Gerard, Dec 5, 2017 at 3:48 PM.

  1. Rick Gerard

    Rick Gerard Member

    Joined:
    Apr 22, 2017
    Messages:
    55
    Likes Received:
    12
    Is it possible to change the Bush Pilot to Com 1? I just purchased a Redrock Micro Satellite and it works extremely well but it seems to only be able to connect to com 2 on the Mimic. It is critical that I have both the Bush Pilot for focus and Iris and the Satellite for an upcoming shoot with a vehicle mount and a black arm.
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,182
    Likes Received:
    448
  3. Bryan Edmonds

    Bryan Edmonds Freefly Staff

    Joined:
    Jul 3, 2014
    Messages:
    164
    Likes Received:
    84
    Bush Pilot only works with COM 2. COM 1 does not have the hardware needed to support the Bush Pilot.
     
  4. Rick Gerard

    Rick Gerard Member

    Joined:
    Apr 22, 2017
    Messages:
    55
    Likes Received:
    12
    I got the Red Rock Satellite to work with the Mimic on Port 1. It works better than expected. I still prefer to control with the Mimic when I can but needed something that would work better in a vehicle.

    I may try a Gamepad also. Been feeling kind of GEEKY this week.
     
    Bryan Edmonds likes this.

Share This Page