/dist/images/branding/favicon
Separate names with a comma.
Good afternoon, i had an aswer from the FreeFly technical support team and here are the infos : - Freefly can not communicate on the way the...
Thanks for your input Andy, i will do that and will keep you updated ;)
Good afternoon, some customers ask us to integrate a pyrotechnical parachute system to their Alta for French regulations oin a particular flight...
Good afternoon, a customer of us ( french research institute) had to go to USA with their Cinestar for a photogrammetry work. Due to the very...
HI, the T8FG Super is in FASST so you should be able to bind 2 receivers with no problems exactly as with a T12. Only FASSTest system needs a...
Hi, I guess there is a heatschrink around the ESC from maytech. Thermal pads if good uality should be allright,and if there is heatschrink to keep...
Hi Jay, BL Heli has a new firmware " S" using hardware PWM control rather than software ( needed when using "limitedl" microrpocessors), enabling...
Hi, here is a simple " walkthrough" regarding Futabe 14 SG. First, many people ask why they need to use Airplane model ( now Multirotor is also...
Hi Tabb, thank you for the detailed explanations, best regards, fabien
Hi, i confirm, changing a motor mount is simple and easy... But motor mount / support or motor base plate weakness giving a "flying away" motor...
HI, whichever folding boom version you have ( VA or V2), it is necessary to make a reinforcement with 3mm / 4mm carbon + alu clamps to strenghten...
Hi Bob, thanks for your offer, i searched just for the core frames ( i have 25mm tubes, clamps, motor mounts, motors, ESc's...) , so a complete HL...
Hi David, we made a LOT of tests with folding props. One thing i can tell for sure is, they are suitable for fixed wings, or for stable RPM /...
Hi, for some testing purpose i am searching for a Cinestar 8 center frames parts ( Top frame, lower frame, clamps), or any solid center frame...
Hi, you should not have a ny troubles : the Phantom reciever is sending out Sbus frames( DJI names it Dbus but it's exactly the same).. Power...
Hi Martin, First of all, always take into consideration that the IMU is leocated on the "last"' driven axis, aka pitch on the MOVI and many other...
Hi Tabb, a customer of mine called me this morning, he bought his Alta 8 + Wedge + Movi controller + Movi from a big dealer in France and has been...
Hi, you need to reduce the PAN stiffness and Hold a tthe maximum until the gimbal oscillates slow, then rise a bitthe value. If the pan motor has...
Hi, i am very sad to read this bad news. I know the GD frames very well and even if they are not perfect, i can guarantee that the X motor mounts...
Hi, as Ozkan said, all products have cons and pros. One thing that is sure, is that whichever gimbal you will go for, it will have it's...