Seems to be a never ending story…. but now i am trying to configure the best solution for my rig. I am an rc-guy, so i don´t have any problems with lipo´s …but: On set i would like to have an easier solution, and only one type of battery, except the MōVI lipo. So i am going the Sony NP-F route… powering the DP-4 on the rig, the AC-7 and the TVlogic 056 PW. I think i am going to solder the regulated USB-cables of the Paralinx TX and RX to the Sony battery plates of all the monitors. So everything outside the gimbal will be powered by the NP-F 770. For the Chrosziel follow focus receiver i will use an y-adapter on the M-10 lipo. So i will have just two types of battery, leaving the cam. In the moment i am using 4-s lipos for the Epic and the Blackmagic, same as i did for the copter, maybe i will change that to the v-mount plate from the FF shop. Does anybody now, if the c-rate of the Sony batteries is high enough to power both, the monitors and Paralinx receivers? Thanks, Wolf