Looking for some help in wiring up the MK Double Quadro V3 Cool in an X8 config on a Cinestar 8 frame, 4 booms. Did some digging and came up with the following: Wiring: Motor 1 => Controller 1 (A: Gr, B: Bl, C: Sw) Motor 2 => Controller 2 (A: Green, B: Bl, C: Sw) Engine 3 => Controller 3 (A: Bl, B: Gr, C: Sw) Engine 4 => Controller 4 (A: Bl, B: Gr, C: Sw) Engine 5 => Controller 5 (A: Gr, B: Bl, C: Sw) Engine 6 => Controller 6 (A: Gr, B: Bl, C: Sw) Engine 7 => Controller 7 (A: Bl, B: Gr, C: Sw) Engine 8 => Controller 8 (A: Bl, B: Gr, C: Sw) This was one config I was able to pull off the German wiki for MK. Yet I also see another: Stumped at the moment on how to move ahead. Derek
Derek, here's what worked for our X8. Very similar. The wiring is determined by validating the motor rotation (no props!) and color coding connectors on the bench. This mix has worked well for us. http://forum.freeflysystems.com/ind...ium-heavy-lift-8-10kg.3079/page-15#post-43950