/dist/images/branding/favicon

looking for 'ready to go' case for M10 and C300

Discussion in 'MōVI M10' started by alain baars, Sep 29, 2014.

  1. alain baars

    alain baars Member

    Joined:
    Feb 5, 2014
    Messages:
    166
    Likes Received:
    5
    I don't want to set up the M10 every time, so I am looking for a solution how to transport the M10 in such a way, that I can leave the camera on it and have it ready to shoot.
     
    #1 alain baars, Sep 29, 2014
  2. Eric De Fino

    Eric De Fino Member

    Joined:
    Sep 1, 2013
    Messages:
    101
    Likes Received:
    14
    I would not recommend leaving the camera permanently on MoVI.
    If you leave the camera built, but remove it from cradle, it takes less than 3 mins to mount and do a quick tilt balance.
     
    #2 Eric De Fino, Sep 30, 2014
  3. alain baars

    alain baars Member

    Joined:
    Feb 5, 2014
    Messages:
    166
    Likes Received:
    5
    maybe that's a good idea, but the former owners of the movie, kept the RED constantly on it. maybe it would be a better idea to take it off, like you suggest.
     
    #3 alain baars, Sep 30, 2014
  4. Eric De Fino

    Eric De Fino Member

    Joined:
    Sep 1, 2013
    Messages:
    101
    Likes Received:
    14
    My logic is, why put all that unneeded stress on the unit? Just a suggestion.

    Cheers,
     
    #4 Eric De Fino, Sep 30, 2014
  5. alain baars

    alain baars Member

    Joined:
    Feb 5, 2014
    Messages:
    166
    Likes Received:
    5
    I see your point, I'll have a chat about it with my seller.
    Point is, I do a lot of corporate stuff, where time isn't available, therefor I try to get the easiest and quickest solution for a 'ready to shoot' situation/
     
    #5 alain baars, Sep 30, 2014
(You must log in or sign up to post here.)

Share This Page