Freefly movi pro on a Blackarm with FX9 fujinon and deflector seawater

Discussion in 'MōVI Pro' started by Mikkel-Becker Aakervik, Nov 25, 2020.

  1. Mikkel-Becker Aakervik

    Joined:
    Jan 28, 2019
    Messages:
    10
    Likes Received:
    1
    Dear Freefly family

    So we have an assignment in about 10 days on the west coast of Norway - so yes salt water. We are filming a Rib with the Movi Pro on a black arm complete with tranquilizer on a larger vessel than the rib possibly 14,5 x 4,5 meter size, maybe larger. The client want the RIB filmed it windy at about 10ms. We have the movi controller and Terradek for video signal. Our set up is FX9 with Fujinon MK 18-55 and 50-135 with 3 x chrosziel motors.

    What would be the best way to cover the movi/ camera/ lense. How will it do in those conditions?
    Should we also use some conformal coating? and can we cover the gimbal and setup in one go?

    We have looked at rain deflectors, but from rental in Norway only solution is the Schultz spray off on LMB5 Matbox powerd by lemo either from the ignite digi or an Anton Bauer on the Cinnemilled plate on the movi.

    How will the balancing do. Would I need to balance at shore and power motors and go out?

    Any good advice would be highly apreciated.

    Mikkel
     
  2. Robert MCgregor

    Robert MCgregor New Member

    Joined:
    Jan 13, 2014
    Messages:
    9
    Likes Received:
    0
    only just seen this, need advice?all sorted? shot already?


    Rob
     

Share This Page