Extending Vertical 15mm Rods On M15 Cage

Discussion in 'MōVI M15' started by Neil Horsman, Dec 16, 2014.

  1. Neil Horsman

    Neil Horsman New Member

    Joined:
    Feb 26, 2014
    Messages:
    17
    Likes Received:
    4
    Just wondered if anyone else had swapped out the 4 vertical 15mm rods on the M15 cage for longer rods to give the cage a bit more height? I know it reduces the clearance from the pan motor, but would give a bit more height in the cage for taller cameras and in my case would allow a top cheese plate to be used on a C300.

    Interested to hear others experiences.

    Cheers, Neil.
     
  2. Pv Ferdani

    Pv Ferdani New Member

    Joined:
    Oct 20, 2014
    Messages:
    7
    Likes Received:
    0
  3. Eric De Fino

    Eric De Fino Member

    Joined:
    Sep 1, 2013
    Messages:
    101
    Likes Received:
    14
    Neil, yes I've done this. Pretty easy. I have a couple of different rod sizes that fit larger cameras.

    Cheers,
     
  4. Neil Horsman

    Neil Horsman New Member

    Joined:
    Feb 26, 2014
    Messages:
    17
    Likes Received:
    4
    Thanks Eric - good to hear others have had success working this way!

    Thanks as well PV for the link, that seems to be about extending the handles rather than the cage height, but it's a really cool idea as well!
     

Share This Page