Separate names with a comma.
Switching over from MK to DJI any suggestions on affordable esc? Running Axi 2814 motors.
The posts I read were a bit dated. I'm sure it's an excellent product just a bit to spendy for me right now.
Also I've read the A2 has a had quite a few problems. Maybe they've ironed them out.
I have a feeling part of it is a ploy to sell their more expensive FC. I've been digging around and it seems to work quite well. At this point I...
Has anyone flown this configuration? I've had it with MK. I just don't trust it and have had way to many issues concerning reliability. (Andy I...
Andy I'll upload the file from card in the next day or so. The rig is in Florence and I'm in Rome. How's that crappy Portland winter weather or...
Both ACC and GYRO calib were done on level ground. I unplugged the battery at least 5 times and redid the calib but to no avail. Maybe the ACC...
Cinestar 8 with MK electronics and 3 axis gimbal. Today we were doing some tests flights with no problems. We landed switched batteries and...
I soldered the I2C connections directly rather than opt for the Molex connecter a while back. Based on a forum members recommendation who is an...
I know about the I2C error. I have a direct solder from the FC to the BL board so in theory the wiring should not cause this problem. I also have...
My bird started toilet bowling went out of control and crashed. Fortunately it as about 15 or so feet off the ground so there was no serious...
Andy let me voice one last thing. I currently have roll locked out so it just stabilizes but is not usable through my radio. My feeling is that...
Andy I've played with the gain setting and for this camera (very light) is about the best it will do. Anything higher I get oscillation. Yes I...
T Thanks for the info. I plan on picking up the Black Magic micro when it comes out in July. The camera does 10bit ProRes 4.2.2 which for most...
Okay so it looks like our newly found beloved brushless gimbal motors will be obsolete soon. I live in Italy and I stopped by the shop today to...
Andy I have mine set at 75 now and seems to be acceptable but as you know Radians are pretty much obsolete now that everyone's is converting their...
Big question. Is there any real difference between the Alex Mos Board and the Martinez board?
Radians will be obsolete in less than 6 months. I see from other forums that this catching on big.
Is that the Martinez board because I don't see a USB socket or is it the IMU?
Josh I had this happen the other day. The sticks were centered when I switched modes. It started freaking out in mid flight. I switched batts and...