/dist/images/branding/favicon
Separate names with a comma.
I have a complete gimbal if you are interested controller and all (no camera) handheld for sale:...
Too expensive
Try this one:...
Interesting that they snap together. Like Gary said an opening on both ends can be a PITA. I use those connectors 3.5mm rated to 80A from MP Jet....
Hi Urs, last time I checked was the GB-100 https://aerialpixels.com/shop/brushless-gimbal-motors/gb100-10-brushless-gimbal-motor/ and GB110...
you guys might want to look here http://www.rcgroups.com/forums/showthread.php?t=2319229 and here...
Have you seen the price for those caps?
No, The length of the wire has nothing to do with it. The difference is in the winding. The impedance will change IF the number of windings around...
Jaime, Go here: http://www.rcgroups.com/forums/showpost.php?p=30335568&postcount=1637 and talk to this guy Garug he knows the 32bit in and out he...
Jaime, I mean what controller you are using for the gimbal
You should be Gary. Is an awesome combo as long you don't use the RLG. Happy holidays to you too. Talk to you next year ;)
Merry Christmas to all and a Happy New Year....:cool:
That's a good choice.
Hi Ary, The CP is good in fact very good especially the autotune feature' It works with most gimbals mostly with the RCTimer legacy gimbal. As for...
Jaime, what controller are you using?
What do you mean when you say it has no power. If the motor keeps moving the copter that means it has power.The motor looks fine from the photos....
do you have a photo of it?
Jamie if it follows with the rotation it means that the follow mode is on. disable yaw follow and give it a try. Bill
Sorry to see that Ary, no matter if is DYI of custom frame it still hurts. I see you used a second clamp but the carbon fiber where you installed...
Ary, I don't recommend the way you have the LG setup. One clamp wont do the job. Find a way to have two clamps on each leg even though the clamps...