Separate names with a comma.
This kind of shot always sucks on a gimbal, it never ever works or look good, I wouldn't even bother, this is a car rig shot that a grip should be...
We're averaging 10-12 months from a set with our rigs, but our gear gets worked very hard in every kind of scenario you can imagine with very...
I would strongly suggest you push for the LT, I think you are setting yourself up for a world of pain trying to make the 35 work well on the rig,...
We have a very nice quick release system that we will be making some official announcements on in the next 3-4 weeks, it works smoothly for...
Yes and they connect with a cable that you can buy from 1a tools who make the Alpha wheels.
The Alpha Wheels with a MOVI Controller stacked on top is currently the best option out there, you can assign the iris knob as dutch/roll axis or...
$600 a day.....are you serious? The absolute minimum it needs as standard is a MOVI Controller and/or a set of wheels, plus a good quality monitor...
I would recommend the Reflex motors from Hocus products, they are fast, responsive and take up very little space, perfect for the XL:...
Black arm works great on a dolly with the moy mount adapter if you're using it on pneumatics or off the track, for use on track and cranes etc i'd...
Nope.
Hey guys, have you tried switching off your jolt rejection, turning it all the way down to zero? Not sure if you realise but with the Pro versus...
Thinking about some MOVI magic.....
I would try leaving jolt rejection at zero and turning pan & tilt hold up to the maximum until you get oscillation, then dial it back a little,...
What is your jolt rejection set to?
Turn tilt and roll hold down to around 10-15. Pan hold down to 30-35 Then go back and try to push your stiffness settings a lot higher manually...
