Separate names with a comma.
By the way, I forgot to mention to everyone that the quote I got from the company that could make the cable at the top of this thread said they'd...
Are you kidding me?! What's the correct sequence?! I feel like i've tried every one imaginable , but I've still yet to see the a7 video coming...
Agreed. Seems with all those wires in HDMI, the flat ribbon option would make it easier to crimp on the connecters you need. Noel, that got me...
Awesome. We're up to 7! I'll put the info out to my local group of RCAPers and see if anyone else jumps on. Has anyone ever tried splicing HDMI?...
Hey all- Don't know how many of you have run into this issue, but I can't find ANYWHERE that makes and sells the HDMI cable that would best suit...
That's all very very helpful, Dave and Gary. Thanks for the info. We just learned the waypoint flying today, and only because we have a job that...
Hey all, so I'm tooling around the forum looking for help on waypoint flying when I saw Andy's suggestion to avoid it. I'm gathering that there's...
Also, I finished the gimbal wiring diagram according to the instructions I was following. As I was hooking it up, I did a number of tests and...
Andy- In a perfect world, all I'd do is work on the Cinestar. But alas, my parents were in town for 2 weeks and I was only just able to apply the...
I sent composite out of the camera to the monitor with success, but would need the right set of connectors to go straight from the camera's HDMI...
Thanks again for all the help and info, Andy. Unfortunately, that just confirms that my wiring was correct. So there must be another reason I'm...
Thanks Andy ... for the info and the compliment to my diagram. I'm a graphic designer first, CineStar 8 builder ... thirteenth probably.:) I used...
Hey all- For now, I've got a GPHero3 on my CS8. I've got a male micro HDMI coming out of the GP, adapted up to male mini HDMI and going into the...
Holy smokes, fellas. All of that is insanely helpful. Thanks so much for all your input. Been scratching my head on that one for at least a couple...
Hey all. I got a little information from the guys at Quadrocopter on this; they're usually pretty good about offering up great info and help, but...