Separate names with a comma.
At the moment I'm running Axi 2826/12 (760 kV) motors and 13 inch T-motor props with 2 x 10.000 mAh 4S batteries. I've bought new U5 motors, 65A...
I'm using a Canon C100 with EF 24mm/2,8 IS lens. All up weight with Ronin-M, C100+24mm and Atomos Ninja Star recorder is 10,1 kg. The footage is...
Hi Andy, I'm running a photo and video business, including aerial work, in Finland. Could you invite me into this converstion too?
Has anyone used the Blackmagic Micro Cinema Camera yet? The pwm/s-bus connectivity, especially if it is possible to use it to control all camera...
Hi everyone, Found this thread just when I finished my "upgrade" of vibration dampening. My problem was that I got high frequency "sequenses",...
Thanks for the link Alex, ordered a pair of them.
Thanks for advice, Dave. Although cheaper, they are also heavier... Regarding booms; could there be flex problems with "regular" 25x23x500mm tube,...
Yes, I realised that quickly... So its either longer booms or additional motor mounts. These might be one solution:...
The big DJI copter do have retracts, but since I have 3-axis (radian) gimbal, would like to be able to use that for still photography (with 5D...
Has anyone seen/done any solution for this?
Thanks Dave. I think I'll stick with flat 8, as you suggested. I have only 450mm booms, so 16 inch props don't fit, lets see if I can fit in 15's...
Thanks for info Dave. I've now ordered the U5's and Maytechs (got them very economically = cheap...). Which propellers have you used?
I'm currently operating Cs 8 with 4S batteries (two 10.000 mAh in parallel). AUW between 8 - 9 kg. Would need to increase flight time from 10 - 5...
Also interested in getting at least two 30 cm:s long male micro HDMI to male mini HDMI cables. I've just got a Atomos Ninja Star, on which both in...
Good to hear, Gustav! Steady flights and happy landings!
Have you tried contacting Andreas @ mikrokopter.nu? He's been very helpful to me. Hannes PS I had a faulty roll servo last week and switched...
What is "the GPX file"? Yes, I have a short clip from the 5DmIII. I have a theory of what caused the accident: It was a summary of four...
Used the AR6115 and PWM cabling. Connected GEAR switch for locking/unlocking tilt control and used Throttle for locking/unlocking roll control....
Thanks Gary, I'll try. Propability is not very high though, the service I got was not amongst the most positive ones... BTW, I had a local rc...
I did not receive any satelite for/with the DX6i (this copter was delivered as RTF...) and DX6i has been controlling the AR6115e (with the...