Separate names with a comma.
Arri all day
I experienced this before the TB-50 and after the release of TB-50s on the Movi Pro. Those screws come loose even when you think they are tight....
Did you ever try finding the CG of the camera and lens before mounting the baseplate. This can make the difference for adding or not adding...
Either the Pan arm screw, top handle, or the female TITH screws are loose. Recheck your pan balance also. There are multiple ways to balance the...
Don’t forget the Ignite Digi Power Adapter? This allows you to use any V-Mount, Gold Mount, or Block Batteries you already own, in case you do not...
UPDATE: I figured out a solution. Wrapping the golden tip of the mimic in alumminum foil actually works. I was less than 5 feet away from the MōVI...
Ask Tom from Ignite Digi. They still have them.
UPDATE: Hey guys, so I was recently on a shoot in downtown Tokyo where we were using the mimic w/o issues only difference was we’re inside a...
No other receivers connected just the mimic
Having issues with the Mimic. Every time I bind the mimic, the Movi jitters even though I have the mimic, w/o the antenna attached, a good 15 -...
You can also get the IGNITE DIGI POWER Adapter and power the camera and rig from battery d-taps.just make sure you have hot-swap capability so you...
Or you can use the Movi Pro ring as a stand just for balancing purposes and mount to the handle bars when you are about to shoot.
Chatted with support via email over the past week. Yesterday I shipped my Movi to them. I will keep you guys updated as far as the diagnosis...
The option to turn off Data Logging is not even available since it will not populate my Movi Pro
