XL pan drift WITH the FOG

Discussion in 'MōVI XL' started by Angus Benson-Blair, Feb 23, 2021.

  1. Angus Benson-Blair

    Angus Benson-Blair Active Member

    Joined:
    Jan 23, 2013
    Messages:
    150
    Likes Received:
    25
    Good morning,

    Just wondering if you can help me out here. I was using a Movi XL this weekend with the FOG and we had slight plan drift throughout the day. Our setup was a hard wired Movi controller with some Alpha Wheels attached to the controller. Drift was present if using either the wheels or the controller's joystick. I have been a Movi user since the first pre-orders of the M10s so reasonably offay with how to use them although happy to learn new lessons / re-learn lessons where required. In other words, pretty sure our tune was spot on but you never know.
     
  2. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,366
    Likes Received:
    1,162
    Hi Angus:
    Firstly, nice to see you on the forum. Long time no speak. Hope you're surviving the pandemic and Brexit!
    Secondly, I apologize, but I can't answer your question, but hopefully another forum user with experience of the same kit will be able to -- I'm posting just to say hello!

    Cheers
    Andy
     
  3. Robin Opgård

    Robin Opgård New Member

    Joined:
    Nov 20, 2012
    Messages:
    28
    Likes Received:
    5
    Make sure the Pan Trim settings in the controller are not set to a knob. We have it set to one of the user knobs, and sometimes our operator (me) forgets and its turned all the way to the left, which makes the movi drift left.
     
  4. Angus Benson-Blair

    Angus Benson-Blair Active Member

    Joined:
    Jan 23, 2013
    Messages:
    150
    Likes Received:
    25
    Hi Andy, all well indeed and just about surviving. Busy start to the year which is good and long may that continue!
     
  5. Angus Benson-Blair

    Angus Benson-Blair Active Member

    Joined:
    Jan 23, 2013
    Messages:
    150
    Likes Received:
    25
    Thanks Robin, I don't think that was the issue but I will certainly check if we see the issue again.
     

Share This Page