wiring the mimic receiver to m15 , I removed the 3 pin from the old receiver to the mimic receiver. Where do I plug in the 5 pin to? Can some one please explain this with a photo? Thx!
man i tried updating the m15 with the beta firmware . it failed and now it seems the m15 is bricked. The 3 lights on the top are no longher flashing, but the mimic light is on http://d27w8s76bjlz9v.cloudfront.net/wp-content/uploads/2015/05/18205042/MoVI-Release-v4.02.zip
i tried this procedure to unbrick it , but no respone https://freeflysystems.zendesk.com/...-do-I-use-my-jumper-cable-to-recover-my-MōVI-
Charles the procedure is correct. Follow it step by step. If it still doesn't work then open a ticket at support@freeflysystems.com. And sounds like you have found where the Mimic RX plugs in.