Will the Spektrum DX7S work with Movi Pro

Discussion in 'MōVI Pro' started by steve green, Sep 22, 2018.

  1. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,351
    Likes Received:
    1,160
    My first thought, even though you shouldn't have to do this, is whether you need to re-bind the AR7000 to the transmitter. It's worth a try. Let us know if that solves the problem.

    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     
  2. steve green

    steve green Member

    Joined:
    Jul 15, 2015
    Messages:
    46
    Likes Received:
    1
    That would be a trip back tot he local hobby shop. But I'll give it a try after the holidays. Would it become un-bound over time? Thanks, Andy.
     
  3. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,351
    Likes Received:
    1,160
    Hmm. You shouldn't need to go back to the LHS, Steve -- unless you don't have a "bind plug" (a JR connector with pins 1 and 3 shorted together).

    The instructions are here (look for the heading bindings in the lower center of the first page): https://www.spektrumrc.com/ProdInfo/Files/SPMAR7000UserGuide.pdf

    Hope this helps
    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     
  4. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,351
    Likes Received:
    1,160
    When you've got the AR7000 in bind mode, then power up the DX7s as described of the DX7s manual -- you can find the manual here:
    https://www.spektrumrc.com/ProdInfo/Files/SPM7800-Manual_EN.pdf

    Cheers
    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     
  5. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,351
    Likes Received:
    1,160
    It's on page 7 of the manual --- sorry, I omitted to write that.

    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     

Share This Page