/dist/images/branding/favicon

Using the 3 Axis Gimbal vs the MOVi

Discussion in 'MōVI M10' started by Richard MacDonald, Aug 22, 2013.

  1. Richard MacDonald

    Joined:
    Jul 11, 2013
    Messages:
    94
    Likes Received:
    15
    Has anyone considered/or read; Modifying their 3 Axis Gimbal to be used like the MOVi? Assuming the modification is simple.

    I'll curious if FreeFly will sell just the handles grips / conversion kit if one would want to use the 3 Axis Gimbal as their "MOVi"
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Richard currently there are no plans announced by Freefly on a conversion kit. If you look at the MōVI photos posted by Freefly and Adam at Quadrocopter here on the forum and Facebook you will see that the build is much different than the current 3 axis with a very limited parts commonality.
     
  3. Sam Slape

    Sam Slape Member

    Joined:
    Oct 8, 2012
    Messages:
    172
    Likes Received:
    8
    I suggest searching google or this forum for "alexmos"
     
  4. Scott Stemm

    Scott Stemm Member

    Joined:
    Apr 10, 2013
    Messages:
    140
    Likes Received:
    6
    You would also probably getting close to the cost of the movi by the time you add in the motors, controller, and development. Not to mention supporting everyone doing it themselves.
     

Share This Page