/dist/images/branding/favicon

TX with OSD doenst work, why ?

Discussion in 'ALTA' started by Brice Tholozan, Oct 26, 2016.

  1. Brice Tholozan

    Brice Tholozan New Member

    Joined:
    Sep 6, 2013
    Messages:
    29
    Likes Received:
    0
    Hi,

    do you know a strategie for put on the alta a VTX that gonna work with the OSD ? different than immersion rc or other

    I mean that I dont understand why there are some vtx that doesnt work.. like Lawmate?
    im so frustrate,

    thanks you
    have a nice day

    (I try to change of course, NTSC and PAL, but nothing happen)
     
  2. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    Hi Brice:
    The best strategy is probably to stay with the recommendations from Freefly.
    Is there a reason why you don't want to use Immersion RC, Fat Shark, or Boscam (those being the transmitters/receivers FF recommends) along with a Ready Made RC camera?

    The underlying problem is that not all FPV systems are created equal and so inter-system compatibility is not something that you can predict with any degree of accuracy.

    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limitâ„¢
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     

Share This Page