telemetry

Discussion in 'ALTA' started by Rolf Ableiter, Sep 26, 2015.

  1. Rolf Ableiter

    Rolf Ableiter Active Member

    Joined:
    Apr 2, 2013
    Messages:
    285
    Likes Received:
    59
    how can i see the voltage with my T14SG futaba?
    i plugged the cable to the primary RX but the TX shows 0V...
     
  2. alex ryan

    alex ryan Member

    Joined:
    May 8, 2015
    Messages:
    227
    Likes Received:
    16
    If you res the 'home/exit' button it should display the ext voltage and Rx voltage.
     
  3. alex ryan

    alex ryan Member

    Joined:
    May 8, 2015
    Messages:
    227
    Likes Received:
    16
    press not res
     
  4. Rolf Ableiter

    Rolf Ableiter Active Member

    Joined:
    Apr 2, 2013
    Messages:
    285
    Likes Received:
    59
    Yes it should :)
    But it shows for both 0 Volt
     
  5. alex ryan

    alex ryan Member

    Joined:
    May 8, 2015
    Messages:
    227
    Likes Received:
    16
    did you see this from Gary Haynes?
    1. Power on the transmitter
    2. Click the Home button to go the telemetry screen
    3. Scroll to the second data section to RECEIVER and click
    4. Scroll to the sensor line, click and scroll/change to
    EXT-VOLT.
    5. Click the Home button and now you should Rx voltage in the top and
    Flight Battery Voltage in the bottom.
     
  6. Rolf Ableiter

    Rolf Ableiter Active Member

    Joined:
    Apr 2, 2013
    Messages:
    285
    Likes Received:
    59
    thanks !!
    i will try this when i am back in the studio
     
  7. Rolf Ableiter

    Rolf Ableiter Active Member

    Joined:
    Apr 2, 2013
    Messages:
    285
    Likes Received:
    59
    got it...
    but i had to switch telemetry for the primary reciever to "act" in the LNK/system menue.

    futaba is new for me - i had Graupner/Jeti and Spektrum for years...
    but now i am fine with this.
    it would be nice to get more Information (vario and height would be very cool) directly to futaba screen instead of the OSD solution together with a FPV cam but i think there is a reason why this isn't implemented (may futaba can only talk with their own sensors)
     
  8. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,366
    Likes Received:
    1,162

Share This Page