Rope Rig Anyone?

Discussion in 'MōVI M5' started by Ariel Ferrer, Apr 28, 2014.

  1. Ariel Ferrer

    Ariel Ferrer Member

    Joined:
    Aug 27, 2013
    Messages:
    40
    Likes Received:
    3
    I want to make a Rope Rig to be able to use the M5 on a continuous 2 floor Shot!! Can anyone have done this and what parts are needed? any pictures? Thanks

    ariel
     
  2. Jason Comparetto

    Jason Comparetto Active Member

    Joined:
    Sep 23, 2013
    Messages:
    269
    Likes Received:
    38
    You mean like this?

    [​IMG]
     
  3. Jason Smoker

    Jason Smoker Active Member

    Joined:
    Oct 23, 2012
    Messages:
    847
    Likes Received:
    67
    hey Jason,
    can you post the parts for this?

    Or anybody got parts list?

    thanks in advance
     
  4. Jason Comparetto

    Jason Comparetto Active Member

    Joined:
    Sep 23, 2013
    Messages:
    269
    Likes Received:
    38
  5. Arthur Vieira

    Arthur Vieira Flight Squad

    Joined:
    Jun 29, 2012
    Messages:
    185
    Likes Received:
    24
    We did a scene where we handed the M5 from the 1st floor to the ground with a rope. We didn't have any right equipment at the time and the rope was almost the right size so we tied only in the center of the M5 handle (scary... no redundancy). It worked fine, just remember to turn off Magestic mode on this setup, because with only one anchor point the handle will turn around. Have the MoVI carrier walk with the Magestic mode ON, as soon as he reach the point to grab the rope, turn Magestic OFF, get the MoVI down, make the second MoVI carrier grab the handles and position them pointing to the same direction as the camera is (Magestic death zone) then turn Magestic ON again.

    Good Luck,
     
    Jason Smoker and Ozkan Erden like this.

Share This Page