RedRock microRemote firmware 4.0

Discussion in 'MōVI Controller' started by Robert Campbell, Apr 5, 2016.

  1. Robert Campbell

    Robert Campbell New Member

    Joined:
    Aug 23, 2013
    Messages:
    14
    Likes Received:
    0
    Thinking about upgrading my microRemote to 4.0. Has anyone experience problems using Akira? The Movi Controller can now run v3.0 but I can't locate the file on redrock's site to download it.
    Tried several times to get email support from RedRock but I get no response back at all.
     
  2. Charles Bergquist

    Joined:
    Aug 15, 2013
    Messages:
    89
    Likes Received:
    28
    I'm on 4.0 and it works. I was apprehensive about it since there were issues with the MoVI Controller and 3.0. However, I have had weird issues with it. Some times it wouldn't connect at the beginning. Also, the settings are under Aux Port Controls now, use the MicroRemote 3.0 setting and press and hold it until it works. You have to do this on every boot up, for some reason it won't "Save Settings" for me in regards to the Aux Port. Hope that helps.
     
    Robert Campbell likes this.
  3. Robert Campbell

    Robert Campbell New Member

    Joined:
    Aug 23, 2013
    Messages:
    14
    Likes Received:
    0
    Thanks Charles. I'll go ahead and upgrade.
     

Share This Page