Radian Firmware 1.03

Discussion in 'Radian' started by John Cunningham, Nov 19, 2012.

  1. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Jul 31, 2012
    Likes Received:
    Gary: I'm going from memory, but I think if you:
    1. Put the Radian into Bootloader mode (power up with the signal pins of ports 5 and 6 shorted together.
    2. Connect up the Radian via the USB cable.
    3. Start up the Bootloader software (not the normal Radian software) and connect to the Radian, I *think* it displays the current version. I may be wrong and only displays the Radian serial number.

  2. Gary McCready

    Gary McCready Active Member

    Oct 26, 2012
    Likes Received:
    Thanks Andy: Worked perfectly. I am running 1.03. I just wanted to check everything now that my PH is finally spot on. I had my gains at default and wanted to try the Roll: 130 and Tilt: 150 settings, to see if I could get rid of some more jitter. Added some more Expo too! Now I need some decent weather, with no rain.

Share This Page