/dist/images/branding/favicon

Movi Tripping Out

Discussion in 'MōVI M10' started by Rich Savage, Oct 23, 2013.

  1. Rich Savage

    Rich Savage New Member

    Joined:
    Oct 2, 2013
    Messages:
    4
    Likes Received:
    0
    Hi Guys,

    I wonder if anyone can help me. Had a lot of trouble with error signals and now it looks like it might be buggered. It went out with a crew shooting on 1Dc and came back with the 5 pin cables disconnected. There's 2 ports for it so I tried both. One didn't allow any power, and the other goes mental as soon as the motor is engaged. I tried resetting to factory Cal to see if that helped, but no joy.

    Any ideas what's going on?

    Cheers!
     
  2. Brad Meier

    Brad Meier Active Member
    Staff Member

    Joined:
    Aug 14, 2012
    Messages:
    749
    Likes Received:
    66
    Can you post a photo of what 5 pin cable you are talking about?
     
  3. Justin Marx

    Justin Marx Active Member

    Joined:
    Oct 3, 2013
    Messages:
    326
    Likes Received:
    26
    Define "mental" it might just be looking for weight on the motors. Are you powering on with or without the camera on the MoVI?
     

Share This Page