Movi M5 Tilt moves in jolty notches

Discussion in 'MōVI M5' started by Brian Artis, Jul 3, 2019.

  1. Brian Artis

    Brian Artis New Member

    Joined:
    Jul 2, 2019
    Messages:
    1
    Likes Received:
    0
    Earlier today while using my movi I experienced an uncontrollable moment in which the movi went haywire upon powering on. Do further investigation the wire within the Tilt motor( located near the power) was disconnected. After turning device back on the gimbal tilt functionality only moved in jolty notches. I have reloaded firmware and adjusted multiple settings within the app but the Tilt functionality only moves and jolty positions. I have gone ahead and verified the three other connections were connected as well by removing and plugging back in. Still experiencing the same issue any advice is welcome. Really hoping it's not a burnt-out motor
     

Share This Page