Movi M5 and DJI A2 FC

Discussion in 'MōVI M5' started by sandeep nandy, Nov 16, 2015.

  1. John Woike

    John Woike New Member

    Joined:
    Jan 30, 2013
    Messages:
    10
    Likes Received:
    1
    Would I be able to do the dual rx setup using a Futaba T8FG super, NAZA, with a M5? Or do I need to have a 14SG? Looking for the simplest solo operator setup with tilt control.

    Thanks,

    John
     
  2. Fabien Deregel

    Joined:
    Jan 27, 2013
    Messages:
    74
    Likes Received:
    30
    HI,

    the T8FG Super is in FASST so you should be able to bind 2 receivers with no problems exactly as with a T12.
    Only FASSTest system needs a "link" procedure on the transmitter, FAAST systems, you just switch your transmitter on, enable RF if necesary, and then you press the bind button on the receiver and switch it on at the same time, release the button afer 2 or 3 seconds, and led goes green : you are OK.
    As you will use Sbus on Naza as well as on Movi, you will not need to change the receiver setting ( mode A , B, C or D) so operation ins pretty easy :)

    Best regards,
    Fabien
     
  3. John Woike

    John Woike New Member

    Joined:
    Jan 30, 2013
    Messages:
    10
    Likes Received:
    1
    Thanks Fabien, I'll give it a try.
     

Share This Page