Movi M10 Vibration Problem (All methods have been tried.)

Discussion in 'MōVI M10' started by Mehmet Dinçer, Oct 31, 2018.

  1. Mehmet Dinçer

    Mehmet Dinçer New Member

    Joined:
    May 8, 2017
    Messages:
    8
    Likes Received:
    0
    Hello guys,

    I had a some tune problem and i checked all forum. I did not found any solution, if is there a someone have solution I would be happy.

    I tried different setups but now my test setup is Movi M10 and Canon 60D.

    I had a noise just at PAN motor.

    I will tell my problem step-by-step;
    - Very well balanced.
    - Checked camera mount.
    - Checked all screw.

    I tested auto tune like %50 and %70. After that I tried possible high stiffness settings and other settings as in manual.

    Still I have a pan noise on apple mobile app tuning screen. I watched some tutorials and videos, there is no any noise at pan indicator.
     
  2. Graham Futerfas

    Graham Futerfas Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    1,202
    Likes Received:
    233
    Did you try turning up your Pan Filter a bit? Can you post screenshots of all your settings from your app?
     
  3. Mehmet Dinçer

    Mehmet Dinçer New Member

    Joined:
    May 8, 2017
    Messages:
    8
    Likes Received:
    0
    Thanks Graham,
    Still we have a noise problem with M10 and i will add some footage our last test. We tested cinema camera and dslr results are same. Also we try different tune and filters. Maybe there is different problems, im not sure.

    password: movi

    Photos from movi. https://drive.google.com/open?id=1geMb4VXwA5wxs0XY0HO3lOI2eaCTmGNY


    I sent mail to freefly support. Do you have any theory?
     
  4. Mehmet Dinçer

    Mehmet Dinçer New Member

    Joined:
    May 8, 2017
    Messages:
    8
    Likes Received:
    0
    Cfg file from that flight.
     

    Attached Files:

Share This Page