Movi M10 Pan Noise Problem (All methods have been tried.)

Discussion in 'MōVI M10' started by Mehmet Dinçer, Oct 31, 2018.

  1. Mehmet Dinçer

    Mehmet Dinçer New Member

    Joined:
    May 8, 2017
    Messages:
    2
    Likes Received:
    0
    Hello guys,

    I had a some tune problem and i checked all forum. I did not found any solution, if is there a someone have solution I would be happy.

    I tried different setups but now my test setup is Movi M10 and Canon 60D.

    I had a noise just at PAN motor.

    I will tell my problem step-by-step;
    - Very well balanced.
    - Checked camera mount.
    - Checked all screw.

    I tested auto tune like %50 and %70. After that I tried possible high stiffness settings and other settings as in manual.

    Still I have a pan noise on apple mobile app tuning screen. I watched some tutorials and videos, there is no any noise at pan indicator.
     
  2. Graham Futerfas

    Graham Futerfas Active Member

    Joined:
    Oct 19, 2015
    Messages:
    973
    Likes Received:
    202
    Did you try turning up your Pan Filter a bit? Can you post screenshots of all your settings from your app?
     
  3. Mehmet Dinçer

    Mehmet Dinçer New Member

    Joined:
    May 8, 2017
    Messages:
    2
    Likes Received:
    0
    Yes i try it. I try different Pan Filter number. Like from 1 till 15 but still there is a noice on pan filter indicator. Just sometimes there is a bit low noise but still there is a noice. I know that there shouldn't any noise on filter indicators.
     

Share This Page