/dist/images/branding/favicon

Movi Controller and Movi RX Binding Issue

Discussion in 'MōVI Controller' started by R Alan Boyle, Oct 13, 2016.

  1. R Alan Boyle

    R Alan Boyle New Member

    Joined:
    Oct 13, 2016
    Messages:
    3
    Likes Received:
    0
    Okay, so I have two M15s, 1 Movi Controller and Movi RX. Generally, I use a DX7 on one and the Controller on the other. I needed to put the Movi Controller on the other M15 but it won't bind. All of the equippment is running the latest firmware.

    I have selected Airborne, and Movi Controller in the app. They are on the same channel. I press the bind button for 2 seconds and it flashes orange. Then I initiate bind on the controller and it finds the movi and locks in solid green. Then after about 3 seconds, it changes to either red, or orange. Either way, its locking in and then losing the connection.

    Any help?
     
  2. Graham Futerfas

    Graham Futerfas Well-Known Member

    Joined:
    Oct 19, 2015
    Messages:
    1,261
    Likes Received:
    245
    Hi Alan, the original Akira firmware had problems binding radios. Are you on the latest 5.0.2 firmware?
     
  3. R Alan Boyle

    R Alan Boyle New Member

    Joined:
    Oct 13, 2016
    Messages:
    3
    Likes Received:
    0
    Yes, thank you. I am running the stable 5.0.2.
     
  4. Thijm le Grand

    Joined:
    Jul 12, 2014
    Messages:
    96
    Likes Received:
    5
    Do you use the Spektrum satt receiver? If so disconnect and try again.
     
  5. R Alan Boyle

    R Alan Boyle New Member

    Joined:
    Oct 13, 2016
    Messages:
    3
    Likes Received:
    0
    I am doing this without the DSMX Sat.
    Thank you
     
  6. Thijm le Grand

    Joined:
    Jul 12, 2014
    Messages:
    96
    Likes Received:
    5
    We had the same problem on v5.02, but that fixed it for us.
     

Share This Page