Separate names with a comma.
Discussion in 'MIMIC' started by Hugh Bell, Apr 17, 2015.
@ Ozkan, why do you think it's not going to work perfectly for aerials?
You said that the Movi Controller would have Mimic Capability with no additional hardware, but do you still have to purchase an activation code or something? I have updated the firmware on both my M15 and Movi Controller, but cannot seem to be able to find where I can enable the "mimic mode"
This is not addressed in the firmware update guide for enabling Mimic in the Movi Controller, and I have been unsuccessful in finding any information on how to specifically enable the mimic mode on your Movi Controller once all firmware has been updated.
Our apologies for any confusion. There is no additional hardware needed or an activation code. The instructions can be found in the release notes listed on the Software&Manuals page of the website. Here is the direct link to the release notes article in the knowledgebase. If you still have questions or issues getting it running, feel free to drop Support a note at firstname.lastname@example.org and they will help you get up and running with it.
If we install the Mimic controller I see that I have to disconnect my spectrum Receiver. of the movi.... Is there a way to keep booth and toggle in the app on which you would like to use? Or do you loose the ability to use your spectrum Radio?
Has anyone tried the Mimic on aerial work? I wonder if it will be safe to use with the CS8 and Movi 10 flying a RED?
Yup - no problems. Have fun Augusto!
I guess you´re using it with the CS8? Any advices before I fly with it?
It's pretty easy to fly with it in MIMIC mode - I think you're over-concerned about it. Just fly my friend - no worries.
Thank you Derek I´ll fly it tomorrow
Did you find out how to switch the roll off? Another thing...my Mimic is working great but the Mimic handlebar is @90 degrees compared to the Movi handlebar...do you know how to solve this?
Yes. Connect to the Movi from the app and change from Direct to "Roll-Off," or something similar - second option in the list.
Teehee... just hold the button down on the MIMIC bar, rotate the MIMIC bar till it's in the same orientation as the Movi handlebar, then release the button - BINGO, aligned.
Found the roll
However pan doesn´t work...
I found it, I think. go to config ----> remote operator config ---> mimic mode ----> value : Maj Pan&Tilt
Walaaaa! Movi FreeFly is just Awesome . keep up the good work freefly !