Mimic FW 1.5.2 and MPRO 1.5.2 NOT communicating

Discussion in 'MōVI Pro' started by Brian Liepe, Dec 5, 2018.

  1. Brian Liepe

    Brian Liepe New Member

    Joined:
    Dec 4, 2018
    Messages:
    3
    Likes Received:
    0
    I feel like I've scoured the forums to make sure there isn't already a thread regarding the current firmware for both the Mimic and MPRO - hopefully I didn't miss it and I'm sorry if I did.

    I just got my MPRO package this week. I am trying to run Focus through the Mimic + Bush Pilot/Gamepad but no luck.

    When I bind the MPRO with the Mimic I don't receive any feedback saying the binding process has failed or succeeded.

    I have however been able to auto-calibrate the focus using the MIMIC; my lens motor rotates and finds close and infinity on my lens. After this, the Bush Pilot and Gamepad do not work.

    Do I NEED the Red RCP cable to make this work?

    Any ideas? Thanks for your time!

    Movi Pro
    Red Epic Dragon
    Red D tap Power cable
    Lens Motor Power cable
    Redrock Micro Torque Lens Motor
    35mm Zeiss CP.2 lens
    Mimic
    Firmware 1.5 on both Mimic and MPRO
     

Share This Page