Mimic and PS4 controller

Discussion in 'MōVI Pro' started by Dale McCready, Apr 16, 2017.

  1. Dale McCready

    Dale McCready Member

    Joined:
    Apr 15, 2013
    Messages:
    40
    Likes Received:
    13
    I didn't want to drill a hole into the Sony PS4 holder so I made this wee bracket to clamp around the holder with the suction mount cut off...

    Then I realised I can do a nicer Kip Lock version with 13mm spud in the back of the Mimic. IMG_6526.JPG Screen Shot 2017-04-16 at 13.30.31.png

    So I'll be making a few of these for fun if anyone's interested.
     
    Graham Futerfas likes this.
  2. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,366
    Likes Received:
    1,162
    Nice work, Dale. The bracket doesn't look 3D printed -- how did you fabricate it?

    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     
  3. Dale McCready

    Dale McCready Member

    Joined:
    Apr 15, 2013
    Messages:
    40
    Likes Received:
    13
    It's milled in alloy. I do a fair bit of design work with my vibration isolators so sending something off to be machined in the same order like this is fairly easy and it's nice to get a fully finished piece of metal back with anodising.
     
  4. Joshua Coté

    Joshua Coté Member

    Joined:
    Nov 3, 2016
    Messages:
    37
    Likes Received:
    10
  5. Dale McCready

    Dale McCready Member

    Joined:
    Apr 15, 2013
    Messages:
    40
    Likes Received:
    13
    well, you buy your PS4 controller and the sony phone holder and then my two parts would be about $100. Not that cheap but a nice tidy solution.
     
  6. Katya Nelhams-Wright

    Joined:
    Jul 8, 2012
    Messages:
    216
    Likes Received:
    9
    Hi Dale
    We'd be interested in one. Based in London:)
    Thanks
    Kat
     
  7. Kazu Okuda_

    Kazu Okuda_ New Member

    Joined:
    Apr 25, 2017
    Messages:
    3
    Likes Received:
    0
    im interested as well
     
  8. Justin Scott Brown

    Justin Scott Brown New Member

    Joined:
    Nov 2, 2016
    Messages:
    12
    Likes Received:
    1
    I'm very interested too. Thanks!
     
  9. Seth Lopez

    Seth Lopez New Member

    Joined:
    Jun 30, 2017
    Messages:
    2
    Likes Received:
    0
  10. Alex Mandiola

    Alex Mandiola New Member

    Joined:
    May 24, 2017
    Messages:
    3
    Likes Received:
    0
  11. Justin Scott Brown

    Justin Scott Brown New Member

    Joined:
    Nov 2, 2016
    Messages:
    12
    Likes Received:
    1
    Any update on these?
     
  12. Danie kelly Brown

    Danie kelly Brown New Member

    Joined:
    Mar 8, 2017
    Messages:
    12
    Likes Received:
    3
    Interested as well.
     
  13. piotr grawender

    piotr grawender New Member

    Joined:
    Aug 7, 2017
    Messages:
    1
    Likes Received:
    0
    interested as well.
     
  14. Keith Ferreira

    Keith Ferreira New Member

    Joined:
    Sep 10, 2017
    Messages:
    10
    Likes Received:
    1
    Very interested.
     
  15. Keith Ferreira

    Keith Ferreira New Member

    Joined:
    Sep 10, 2017
    Messages:
    10
    Likes Received:
    1
    Very interested
     

Share This Page