M10 snaps to zero position...

Discussion in 'MōVI M10' started by Norbert Blenk, Feb 6, 2015.

  1. Norbert Blenk

    Norbert Blenk Member

    Joined:
    Sep 12, 2013
    Messages:
    52
    Likes Received:
    6
    Hi there,

    when in Airborne mode and facing straight downwards my M10 snaps heavily upwards into horizontal position.
    I figured out this happens when the RC is doing dropouts as shown in the charts.
    In handheld mode i don't have this problem.

    Any thoughts?

    Norbert
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Norbert I think it is normal. Loss of signal, if I remember correctly, results in the MoVI going into Majestic mode, so the tilt will go back to level.
     
  3. Michael Elsegood

    Joined:
    Oct 26, 2013
    Messages:
    80
    Likes Received:
    20
    Hi Norbert,

    I battled with this for a long time - I believe you are correct in it being a loss if signal.

    I've not had any issues since switching to Futaba

    I bought a Futaba 14sg and a basic SBUS receiver (as the stock receiver that ships with 14sg is incompatible)
     

Share This Page