hello guys, i need your help! Aircraft Type: CS8 Gimbal Type: free fly Radian Type ( 1, 2 , 3 axis) 3 axis Gimbal Power source: Gimbal Radio Type: futaba 8fg Radian Communication Protocol (S.Bus, PPM, PWM, Spektrum) sbus Connections: Change these to match your setup Roll Sensor: Port 1. from pan 2. 3. To Tilt radian 4. To Roll Servo Tilt Sensor: Port 1. from roll 2. 3. 4. to tilt servo Pan Sensor: Port 1. futaba receiver 2. power 3. to roll radian 4. to pan servo Symptoms: roll was working well and suddenly stops!!! then lights in mode off: tilt both solid / roll green solid and orange fast blink / pan orange solid and green slow blik leds in mode on: tilt and pan both solid / roll the same i can control pan and tilt in RC, video