Okay... Hello to everyone! I recently flew to Montana to build my Cinestar 8 HL. While being there I did not remember everything I was told so I need your help. I was just about to fly when I realized that I had traveled about 30 miles away from where I calibrated my compass last. I thought it would be a good idea to recalibrate before my next flight. So I calibrated and all went well except for when after I restarted the cinestar. I turned my graupner back on, pushed my stick up and to the left and I heard 5 beeps instead of my usual 3 beeps. I think it was because of after the calibration, I moved the sticks in a weird direction and didn't think anything of it until I heard the 5 beeps. I remember talking about this with my build tech on how/what to do in the event of switching the settings for startup on the graupner but I forgot how to rectify the situation. How do I get it back to normal without plugging the cinestar into MK Tool? Thanks in advance!
I suspect that moving the sticks you have selected parameter set 5 instead of parameter set 3. Check here: http://forum.freeflysystems.com/index.php?threads/led-lights-flashing-a-warning.4364/#post-46506 Message #8. It shows you the stick movements to set it back to Parameter set 3. Andy.