D-tap splitter

Discussion in 'MōVI Pro' started by Ivan Robles Mendoza, Feb 13, 2017.

  1. Ivan Robles Mendoza

    Ivan Robles Mendoza New Member

    Joined:
    Feb 11, 2017
    Messages:
    23
    Likes Received:
    0
    is it safe to use a d-tap splitter to connect a shogun and a paralinx ace to the single D-tap port on the top of the controller?
     
  2. Josh Lambeth

    Josh Lambeth Well-Known Member

    Joined:
    Jun 29, 2012
    Messages:
    1,315
    Likes Received:
    216
    We have split the D-tap from the camera port and also the port on the GCU. The GCU port was powering a 702Bright and Connex Downlink all day without issues.

    Josh
     
    Ivan Robles Mendoza likes this.
  3. Ivan Robles Mendoza

    Ivan Robles Mendoza New Member

    Joined:
    Feb 11, 2017
    Messages:
    23
    Likes Received:
    0
    Thanks a lot for the quick reply.
    Wishing you the best!!
     
  4. Ivan Robles Mendoza

    Ivan Robles Mendoza New Member

    Joined:
    Feb 11, 2017
    Messages:
    23
    Likes Received:
    0
    The d-tap port in the GCU wasn't able to power a shogun inferno and a paralinx ace at the same time.
     
  5. SeBaStIaN BArrEtT

    SeBaStIaN BArrEtT Active Member

    Joined:
    Oct 30, 2016
    Messages:
    343
    Likes Received:
    67
    which firmware Ivan?
     
  6. Ivan Robles Mendoza

    Ivan Robles Mendoza New Member

    Joined:
    Feb 11, 2017
    Messages:
    23
    Likes Received:
    0
    1.1
     

Share This Page