Cinemilled Movi Adapter and TITH

Discussion in 'MōVI Pro' started by Brandon Obey, Dec 7, 2017.

  1. Brandon Obey

    Brandon Obey Member

    Joined:
    Dec 27, 2016
    Messages:
    55
    Likes Received:
    7
    So I am having a weird issue with mounting the Cinemilled Movi Adapter to the Male TITH. For some reason, out of the (4) M3 screws that Freefly provides with the TITH I can only thread in 3 of them into the Cinemilled Movi Adapter. When I try to thread in the 4th screw I start to strip the hole of the Movi Adapter. I am following the guide lines that are on the adapter, but maybe I have the incorrect orientation of how to line up the holes of the Movi Adapter to the holes of the Male TITH.


    Does anyone else experienced this? If so can you post pictures that could help me?
     
  2. Rob Weidner

    Rob Weidner New Member

    Joined:
    May 13, 2017
    Messages:
    28
    Likes Received:
    0
    Brandon, I also had to kind of force my TITH onto the Cinemilled plate. At first I was reluctant or though that threads were incorrect, but after screwing them all in without the TITH, and then carefully easing each screw one by one (doing about 5 total passes over the 4x screws) I eventually got it sitting nice and tightly.
     

Share This Page