Change use of joystick on spectrum

Discussion in 'Camera Operating' started by Charlie Beyer, May 27, 2014.

  1. Charlie Beyer

    Charlie Beyer Member

    Joined:
    Nov 12, 2013
    Messages:
    70
    Likes Received:
    3
    Can someone tell me how to change the assigns to the left joystick from pan speed to roll. Also is it possible to have the roll be locked in one place rather than go back to level.
     
  2. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Charlie other than roll trim there is no other roll control available currently.
     
  3. Chris Fox

    Chris Fox Active Member

    Joined:
    Apr 14, 2013
    Messages:
    463
    Likes Received:
    86
    Have a look at the channel mapping on the app, you can move most of the controls around to the different stick or knob on the transmitter, I haven't used the spectrum, but on the futaba 8FG we have experimented with roll on the yaw control (left stick horizontal) and on the roll control (right stick horizontal) ... just write down each setting before playing around with it, as you may want to go back to defaults or undo some of the experimentation ;)
     
  4. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,347
    Likes Received:
    1,159
    Chris: If my memory is correct, I don't think the Spektrum allows the same flexibility in channel mapping as the Futaba or Graupners. At least not on the DX7s and DX8. But that's a question that looking in the manual will answer.

    Andy.
     
    Chris Fox likes this.

Share This Page