Ah but I didn't say which AR receivers. The test we did was on this post. http://forum.freeflysystems.com/index.php?threads/spare-channel-output.2417/#post-35412 It was with the AR6210.
G Gary I'm going to try a direct connection from the Spektrum Satellite. Some NOOB questions here... With the current setup, I am running off of the FC then going to a BEC prior to the Radians. If I go direct, from what I'm gathering from the Radian instruction manual, I'm in essence providing power to the Radians directly from the Satellite, correct? That being said, do I need to reposition the BEC to reduce voltage? Secondly, all of the instructions for this setup that I can find reference a 3-axis gimbal. With that being said, if I'm only running a 2-axis, as far as instructional purposes are concerned, I would connect to the roll Radian first and then daisy chain to the tilt? Thanks, Chris
If you use the Spektrum Sat you would still need the BEC to provide overall power. My 2 Axis setup had BEC power and the Receiver plugged into the Roll and then the single cable from the Roll to the Tilt Radian. Can you post a photo of your setup since I'm not following the 'FC then going to a BEC' part?