/dist/images/branding/favicon

Bush Pilot + Mimic using Red RCP and Canon Lenses.

Discussion in 'MIMIC' started by tom J. kelly, Jan 24, 2019.

  1. tom J. kelly

    tom J. kelly New Member

    Joined:
    Aug 17, 2018
    Messages:
    8
    Likes Received:
    0
    Mimic is working and I'm able to control the Red settings through the mimic. I have the bush pilot connected to com2 port and have calibrated the knob. I can see the dial moving as I turn the follow focus knob on the bush pilot so that is working. Only thing that isn't working is when I pull focus nothing happens. To clarify I'm not using a motor but a Canon 24-70mm lens set to auto focus with a Red camera. I can pull focus with fool control but not the bush pilot.

    Is there a setting I am missing?


    Best

    Tom
     

Share This Page