I hope this isn't a Capt. Obvious post or repeat, but I was watching one of the live playbacks and a good tip was found. This will be more useful for the newer users. Once the phone (iPhone X in this case) is balanced, the Movi app open, and the MCR turned on, put the MCR in sleep mode. The app will change to the "MOVI IS SLEEPING" screen. There are two white tic marks on that screen; one at top, one at bottom. Swipe screen left or right to line up the tics marks with the notches on the MCR adjustable clamps. Those marks will remain in place after the MCR is powered off and the app is closed. I suspect a Reset will place them back to original screen starting point. Next time you you fire up the system, activate Sleep Mode to do a quick tic mark alignment. It saves a little time at least. SleepModeTicMarks by Dave Johns posted Aug 1, 2018 at 5:45 PM