ALTA X OSD

Discussion in 'ALTA X' started by Andrew H. Petersen, Nov 7, 2020.

  1. Andrew H. Petersen

    Andrew H. Petersen New Member

    Joined:
    Jan 26, 2013
    Messages:
    4
    Likes Received:
    1
    Hello my fellow X pilots,

    I am wondering if the OSD settings menu within the X aircraft is now embedded into the QGC app?

    On the A8 you would go into the mobile app and could adjust parameters there...

    I can’t seem to find any mention of the OSD settings in the manual. If you know where I can find this please feel free to share.

    Thanks to all and smooth landings!

    AP
     
  2. Andrew H. Petersen

    Andrew H. Petersen New Member

    Joined:
    Jan 26, 2013
    Messages:
    4
    Likes Received:
    1
    Just in case anyone was looking for follow up here you just connect to the X with a USB-C cable located in one of the expansion bays. Power should come through the cable to the X and then you can open up QGC and change the values under the settings menu. Hope this helps the next pilot and as always, smooth landings!

    Andrew Petersen
     
    Jon Krosby likes this.

Share This Page